Home About
Formwork Systems
Specialised Formwork Systems
Scaffolding Systems
Coupler & Accessories
View All Products (78) →
Projects Blog Contact

MOD SCAFF · Faridabad, Delhi/NCR

Coupler & Accessories

From swivel and right-angle couplers to cuplock fittings, clamps, tie rods and jacks — MOD SCAFF manufactures the full range of scaffolding couplers and accessories that hold every structure together, built and tested at our Faridabad facility.

Swivel Coupler - MOD SCAFF

Swivel Coupler

Connects two scaffold tubes at any angle, giving erectors the flexibility to build diagonal braces and irregular joints. Pressed from quality steel for a firm, non-slip grip under load.

Right Angle Coupler - MOD SCAFF

Right Angle Coupler

Locks two tubes together at a fixed 90° angle to form rigid ledger-to-standard joints. A structural mainstay for load-bearing scaffold frames and staging.

Forged Swivel Coupler - MOD SCAFF

Forged Swivel Coupler

A drop-forged version of the swivel coupler for higher load ratings. Connects tubes at any angle with the extra strength and fatigue resistance forging gives over pressed steel.

Forged Right Angle Coupler - MOD SCAFF

Forged Right Angle Coupler

Drop-forged for maximum strength, this coupler joins tubes at a fixed right angle — built for heavy-duty scaffolds and structural frameworks where load-bearing rigidity is critical.

Sleeve Coupler - MOD SCAFF

Sleeve Coupler

Joins two tubes end-to-end to extend a scaffold tube's length, giving a strong, aligned connection for building out ledgers, standards and long horizontal runs.

Board Clamp - MOD SCAFF

Board Clamp

Secures scaffold boards and planks to the horizontal ledger tubes, stopping movement and creating a stable, safe working platform for site crews.

Pressed Putlog Clamp - MOD SCAFF

Pressed Putlog Clamp

Connects a putlog or transom to the ledger to frame out the scaffold's working platform. Pressed from steel for a lightweight, cost-effective fixing.

Single Clamp - MOD SCAFF

Single Clamp

A single-tube fixing used to attach one tube to another at a set position — ideal for adding extra bracing or support points without a full coupler.

Cold Rolled Tie Rod - MOD SCAFF

Cold Rolled Tie Rod

A high-tensile steel rod that ties opposing formwork panels together during concrete pours, resisting the lateral pressure of wet concrete. Cold rolling improves strength and surface finish.

Waller Plate - MOD SCAFF

Waller Plate

Pairs with tie rods and wing nuts to spread concrete pressure evenly across the formwork face, protecting panels from point loads and keeping shuttering straight and true.

Round Spigot - MOD SCAFF

Round Spigot

An internal spigot pin that joins two tube ends to extend a standard vertically or horizontally, keeping the joint aligned while transferring load through the connection.

Prop Sleeve - MOD SCAFF

Prop Sleeve

A sliding sleeve fitted to adjustable props that lets crews fine-tune working height with a quick, secure locking pin — no separate tools needed.

Top Cup - MOD SCAFF

Top Cup

The rotating half of a cuplock joint — drops over the bottom cup to lock ledger blades in place, letting standards and ledgers connect at any level without loose fittings.

Bottom Cup - MOD SCAFF

Bottom Cup

Welded to the vertical standard, the bottom cup holds up to four ledger blades and the top cup, forming the fixed base of every cuplock connection.

Ledger Blade - MOD SCAFF

Ledger Blade

Welded to the end of a horizontal ledger, the blade slots into the bottom cup and locks under the top cup — the connection that gives cuplock scaffolding its speed and rigidity.

Anchor Nut - MOD SCAFF

Anchor Nut

Threads onto a tie rod and casts into the concrete pour, giving formwork a fixed anchor point that holds the panel securely until the tie rod is later withdrawn.

Image coming soon

Wing Nut

A hand-tightened nut with two wings for fast, tool-free fastening — used on tie rods and waller plates to lock formwork panels in place without a wrench.

Bridge Clamp - MOD SCAFF

Bridge Clamp

Spans and clamps larger sections of tube or beam where a standard coupler won't reach, giving extra grip and stability across wider structural connections.

Hollow Jack - MOD SCAFF

Hollow Jack

A telescoping base/screw jack that fine-tunes scaffold height on uneven ground. MOD SCAFF manufactures its hollow jacks in-house at Faridabad for a precise, reliable fit.

Rapid Clamp - MOD SCAFF

Rapid Clamp

A quick-release clamp for fast, tool-light fastening in woodworking, metalworking and site fabrication — engineered for a firm hold with minimal effort.

Need a custom quantity or spec?

Talk to our team for bulk pricing, custom sizes, and delivery across India.

Get a Quote →
FAQs

Frequently Asked Questions About Couplers & Accessories

What couplers and accessories does MOD SCAFF manufacture? ▾
MOD SCAFF manufactures swivel, right angle and forged couplers, sleeve couplers, board and putlog clamps, cuplock fittings (top cup, bottom cup, ledger blade), tie rods, waller plates, wing nuts, hollow jacks and more.
Are MOD SCAFF couplers ISO certified? ▾
Yes, all couplers and accessories are manufactured under ISO 9001:2015 certified processes at our Faridabad, Delhi/NCR facility.
Can I order couplers and accessories in bulk? ▾
Yes, MOD SCAFF supplies couplers and accessories in bulk quantities with pan-India delivery — share your requirement via the contact form for custom pricing.
Do you offer custom sizes for couplers and clamps? ▾
Most items are available in standard sizes, with custom diameters and lengths available on request for specific project drawings.